Keep Your Jewelry in Original Condition
The advanced anti-tarnish coating agent that prevents discoloration and blackening using the latest fluorine technology.
The advanced anti-tarnish coating agent that prevents discoloration and blackening using the latest fluorine technology.
Everyday exposure ruins your favorite pieces. Silver blackening is a chemical reaction caused when the metal interacts with hydrogen sulfide in the air or salt from sweat. This reaction dulls the shine and destroys the beauty of your treasured accessories.
Jewelry Protect utilizes an extremely safe, latest-generation fluorine technology to create a powerful, invisible barrier on your jewelry. This coating effectively shields silver and other metals from the elements that cause tarnishing, keeping your accessories in pristine, original condition.
A silver chain was left in a chamber with concentrated hydrogen sulfide for 48 hours. The results speak for themselves.
Severely blackened and discolored.
The original, untarnished chain.
Remained completely untarnished.
Thoroughly remove all dust, grease, and dirt from your jewelry.
Apply the liquid by dipping, brushing, or using a cotton swab.
Let the piece air dry for approximately 30 seconds. That's it!
Anyone can apply it easily, without mistakes.
Here are some popular ways to apply, tailored to the size and shape of your accessories.
Simply dip your accessory into the Jewelry Protect solution and lift it out.
It dries in about 30 seconds—done!
Use any brush you like.
Even makeup applicators, like eyeshadow brushes, work great!
Lasts 6 months to 1 year with regular use. Wears gradually with friction, not over time.
Contains no irritants and is 100% non-flammable. Safe for home use and transport.
Applies as a colorless, transparent liquid with virtually no odor. A single thin layer is all you need.
10g can coat approx. 450 simple rings. A little goes a very long way.
Item Code: 601-139
Item Code: 601-140
Item Code: 601-141
A: The duration varies by use, but it is typically around 6 months to 1 year for a regularly worn item. The layer gets thinner by physical friction, not by time alone.
A: Yes. No irritants are used in the formula. The liquid is also non-flammable.
A: We do not recommend it. While multiple coats can increase the effect, the layer may become too thick and appear milky, reducing transparency. A single thin layer is enough for jewelry.
A: 10g can coat about 4500cm². If you are dipping simple rings (approx. 10cm² surface area), you can coat about 450 of them. Using a brush will absorb some liquid, resulting in less coverage.