Alfa Mirage Web Site

ELECTRONIC DENSIMETER SD-200L

For measuring solid and liquid specific gravity; Density resolution:
0.0001g/cm³ Capable of measuring solid specific gravity and volume,
and its variations down to the fourthdecimal place.

FEATURES
Densimeter with super-accuracy of density resolution of 0.0001g/cm³.
Very simple measuring procedure allows anyone to use easily
Solid volume and specific gravity of solid and liquid can be measured
with one unit.

SOLID MODE
Capable of measuring volume variation factor.
Capable of indicating errors for the measured value.
Capable of setting measurement time at will.

Capable of compensating water temperature at will: capable of compensating water temperature,
which is required for the measurement of the specific gravity.
Capable of measuring plastic pellets.
Capable of measuring readily floating samples, such as urethane rubber, plastics, sponge, and wood.

LIQUID MODE
Volume of sample needed for measurement is about 50cc.
To measure different samples successively, just simply replace the beaker.
A measurement result represents only value obtained through measurement at room temperature.

Indication: Weight in the air; Weight in the water; Value of specific gravity; Volume

Sales volume: about 1,000 units

OPTIONAL PARTS
Printer AD-8121B: Dot impact type
Liquid gravity kit, which is need for measurement of liquid.
RS-232C Interface, which is indispensable in case of connection with a printer or a PC
ISO-related documents: Traceability; Calibration Certificate; Report on of Inspection Results.

Product Name	Electronic Densimeter SD-200L
Density resolution	0.0001g/cm³
Scale capacity	0.0001~200g
Measuring Method	Conform to Pycnometer and Hydrostatic Method
Standards	JIS K6268A, former JIS K6350 (Rubber), JIS K7112 (Plastic) etc ASTM D297-93-16 (Rubber), ASTM D792-00 (Plastic) etc
Power source	AC115~240V
Dimensions	213(W) X 319(D) X 301(H); Weight : 5.8kg




			996KB